Book ahead: inspections from October 26 to November 30 are 10% off. Reserve a date

IEP · FL MRSA #4575 · ACAC CMI

Volusia County · Custom quote

Mold Inspection, Mold Testing & Specialty Testing in DeLand, Florida.

Founder-performed by Daniel Melendez, a microbiologist and former environmental lab analyst. Lab-supported, independent of remediation, with DeLand inspections scheduled by appointment.

Service in DeLand is available by appointment with a custom quote. Request a written quote, or book online and the rate for your property is confirmed with you before the appointment.

What is mold inspection in DeLand?

A mold inspection in DeLand is the structured assessment of a home or commercial property to identify mold growth, moisture sources, and indoor air quality conditions. The process combines a visual walk-through of every accessible space, moisture-meter readings on each suspect surface, thermal imaging that flags surface-temperature patterns worth confirming with a moisture meter, an evaluation of the air conditioning system, and attic access where it is safe. Three accredited-laboratory samples are included and collected where the findings call for them rather than to a fixed formula. Everything is documented in a written report with photographs, instrument data, and laboratory results. Every inspection is performed personally by Daniel Melendez, a microbiologist and Florida-licensed mold assessor. PureSpec performs environmental assessment and testing only. It never performs remediation. PureSpec covers DeLand, including Stetson University historic district, Boulevard, Athens Theatre. Service in this area is available by appointment with a written custom quote. Contact PureSpec for current availability.

Daniel Melendez, founder and lead mold inspector at PureSpec Environmental

Your inspector

Daniel Melendez

Microbiologist · Florida Mold Assessor MRSA #4575 · ACAC CMI · Former environmental lab analyst

More about Daniel
American Council for Accredited Certification board-certified seal issued to Daniel J. Melendez, Council-certified Microbial Investigator, certification number 2407011

Where we work in DeLand

From single-family homes to commercial buildings.

  • Two-story Florida single-family home with tile roof, representative of the residential DeLand properties PureSpec inspects.
    RESIDENTIAL

    Residential Mold Inspection

    Single-family homes, townhouses, and condos across DeLand, full-property and limited-scope assessments by a state-licensed mold assessor.

  • Modern multi-story commercial office building with glass curtain wall
    COMMERCIAL

    Commercial Mold Assessment

    Office, retail, healthcare, school, and hospitality buildings across the DeLand metro, reporting structured for property managers, insurers, and OSHA-aware contexts.

  • Modern multi-family apartment building with balconies, representative of the DeLand tenant-occupied properties
    APARTMENT

    Apartment / Tenant Mold Inspection

    Independent third-party documentation built for renters dealing with landlords and property managers across DeLand-area multifamily housing.

Which service you need

What each PureSpec service answers in DeLand.

Find the question closest to yours. Every service is performed personally by Daniel Melendez, a microbiologist and former environmental lab analyst, and every sample ships to an AIHA-LAP-accredited third-party laboratory under chain-of-custody.

DeLand-area CIRS and chronic-illness patients often work with integrative practices in Daytona Beach, Ormond Beach, and DeLand, which routinely use these results as part of an environmental workup. The pattern shows up particularly on A1A barrier-island inventory in Daytona Beach Shores and New Smyrna Beach where salt-air corrosion accelerates HVAC failure cycles.

How an DeLand inspection actually works

Twelve steps. Same scientific process, every DeLand property.

The depth of each step adapts to your situation. Tracer smoke testing and borescope inspection happen when conditions warrant. Sampling is decided based on what your specific environment is asking, not a fixed checklist.

  1. 01

    Consultation

    We talk through what you’re seeing, the building, and the question you need answered. Free, no pressure, no upsell.

  2. 02

    Humidity and dew point

    Temperature, relative humidity and dew point are recorded room by room, with an outdoor reference, because a surface colder than the dew point collects water without any leak.

  3. 03

    Indoor air quality screening

    Real-time particle counts across size channels, with on-site carbon dioxide, VOC and formaldehyde screening, room by room. Screening, not laboratory analysis.

  4. 04

    Comprehensive HVAC evaluation

    Each air handler is opened and checked: blower compartment, coil, drain pan, supply and return plenums, filter, and the attic duct runs it feeds. A frequent hidden source of indoor mold in Florida buildings. Salt-corroded coastal coils on barrier-island inventory and short-cycling oversized HVAC in inland master-planned subdivisions are the recurring findings.

  5. 05

    Tracer smoke testing when needed

    Smoke makes local air movement visible at the HVAC system and around penetrations and openings; temperature, humidity and surface-temperature readings help evaluate whether condensation is possible.

  6. 06

    Mold visual inspection

    Daniel personally walks every accessible space in the DeLand property. No subcontractors.

  7. 07

    Thermal imaging

    Infrared imaging surfaces temperature differentials that often correlate with hidden moisture or insulation gaps. Useful on the A1A oceanfront strip where wind-driven-rain entry past stucco-window flashing creates lateral cavity travel.

  8. 08

    Moisture mapping

    Pin and pinless moisture meters identify elevated wall, floor, and substrate moisture invisible to the eye. Atlantic barrier-island salt humidity in Daytona Beach Shores and New Smyrna, and pre-war pier-foundation moisture in DeLand and Ormond Beach, are the recurring patterns.

  9. 09

    Targeted sampling

    Air, surface, swab, ERMI, HERTSMI-2, mycotoxin, Pathways™, VOC, or formaldehyde, only the tests your situation warrants.

  10. 10

    Lab analysis

    Samples sent to AIHA-LAP-accredited third-party laboratories. Results returned within 24 to 72 hours of receipt.

  11. 11

    Written report

    Plain-English report with photos, lab data, moisture readings, observations, and clear next steps. Organized so the client and relevant third parties can follow the observations, data, methods and basis for the assessment conclusions.

  12. 12

    Remediation protocol when warranted

    If assessment findings support professional remediation, Daniel can write, as an optional add-on quoted separately, the IICRC S520-aligned remediation protocol, scope, containment, methods, and clearance criteria, that the remediation contractor works to. PureSpec does not remediate, so the protocol stays independent of the work crew.

Coverage

Every DeLand neighborhood, by appointment from Orlando.

Downtown DeLand and the Stetson University area, the historic Garfield Avenue district, Glenwood, the SR-44 corridor, Cresswind, Victoria Park, and the rest of west Volusia County's seat. DeLand is the seat of Volusia County in west Volusia, ~45 miles northeast of Orlando. Inspections are scheduled by appointment.

Don’t see your neighborhood? Call (321) 324-7756, Daniel travels to every part of the area by appointment.

FAQ

DeLand questions, answered.

What is unusual about DeLand's housing stock for mold inspections?

DeLand was the original Volusia County seat and home to Stetson University since 1883, which means the historic core around Woodland Boulevard and the Stetson campus carries one of the deepest pockets of early-20th-century craftsman, bungalow, and Florida vernacular housing in inland Florida. That stock requires envelope-aware inspection that is different from anything the post-1970 inventory needs.

Do you inspect Stetson-adjacent rental and student housing?

Yes. The neighborhoods immediately surrounding the Stetson University campus carry significant converted single-family rental inventory with high tenant turnover, deferred HVAC maintenance, and original-era plumbing penetrations. Tenant-side inspections in landlord disputes are a steady volume.

Can you inspect downtown DeLand commercial and historic mixed-use buildings?

Yes. The downtown DeLand historic commercial district around Indiana Avenue, Woodland Boulevard, and the Athens Theatre carries older masonry mixed-use buildings with modern HVAC retrofits, dropped-ceiling assemblies over original tin ceilings, and rooftop-unit condensate failures dropping into the building envelope.

How fast can a DeLand inspection be scheduled?

Routine pre-purchase work in DeLand is generally scheduled within 48 to 72 hours. Post-loss and insurance-driven work is quoted separately and prioritized. Call (321) 324-7756 to confirm availability.

Nearby cities & towns

Call Now Request a quote