Book ahead: inspections from October 26 to November 30 are 10% off. Reserve a date

IEP · FL MRSA #4575 · ACAC CMI

Florida · Custom quote

Mold Inspection, Mold Testing & Specialty Testing in Hillsborough County, Florida.

Founder-performed by Daniel Melendez, a microbiologist and former environmental lab analyst. Lab-supported, independent of remediation, with Hillsborough County inspections scheduled by appointment.

Service in Hillsborough County is available by appointment with a custom quote. Request a written quote, or book online and the rate for your property is confirmed with you before the appointment.

What is mold inspection in Hillsborough County?

A mold inspection in Hillsborough County is the structured assessment of a home or commercial property to identify mold growth, moisture sources, and indoor air quality conditions. The process combines a visual walk-through of every accessible space, moisture-meter readings on each suspect surface, thermal imaging that flags surface-temperature patterns worth confirming with a moisture meter, an evaluation of the air conditioning system, and attic access where it is safe. Three accredited-laboratory samples are included and collected where the findings call for them rather than to a fixed formula. Everything is documented in a written report with photographs, instrument data, and laboratory results. Every inspection is performed personally by Daniel Melendez, a microbiologist and Florida-licensed mold assessor. PureSpec performs environmental assessment and testing only. It never performs remediation. PureSpec covers Hillsborough County, including Tampa, Brandon, Riverview, Plant City, Valrico. Service in this area is available by appointment with a written custom quote. Contact PureSpec for current availability.

Daniel Melendez, founder and lead mold inspector at PureSpec Environmental

Your inspector

Daniel Melendez

Microbiologist · Florida Mold Assessor MRSA #4575 · ACAC CMI · Former environmental lab analyst

More about Daniel
American Council for Accredited Certification board-certified seal issued to Daniel J. Melendez, Council-certified Microbial Investigator, certification number 2407011

Where we work in Hillsborough County

From single-family homes to commercial buildings.

  • Two-story Florida single-family home with tile roof, representative of the residential Hillsborough County properties
    RESIDENTIAL

    Residential Mold Inspection

    Single-family homes, townhouses, and condos across Hillsborough County, full-property and limited-scope assessments by a state-licensed mold assessor.

  • Modern multi-story commercial office building with glass curtain wall
    COMMERCIAL

    Commercial Mold Assessment

    Office, retail, healthcare, school, and hospitality buildings across the Hillsborough County metro, reporting structured for property managers, insurers, and OSHA-aware contexts.

  • Modern multi-family apartment building with balconies, representative of the Hillsborough County tenant-occupied
    APARTMENT

    Apartment / Tenant Mold Inspection

    Independent third-party documentation built for renters dealing with landlords and property managers across Hillsborough County-area multifamily housing.

Which service you need

What each PureSpec service answers in Hillsborough County.

Find the question closest to yours. Every service is performed personally by Daniel Melendez, a microbiologist and former environmental lab analyst, and every sample ships to an AIHA-LAP-accredited third-party laboratory under chain-of-custody.

Hillsborough County-area CIRS and chronic-illness patients often work with integrative practices in Wesley Chapel, South Tampa, and Westshore, which routinely use these results as part of an environmental workup. The pattern shows up particularly in the Westchase, New Tampa, and Wesley Chapel master-planned belt where attic-mounted air handlers and pan rust-through are the recurring findings.

How an Hillsborough County inspection actually works

Twelve steps. Same scientific process, every Hillsborough County property.

The depth of each step adapts to your situation. Tracer smoke testing and borescope inspection happen when conditions warrant. Sampling is decided based on what your specific environment is asking, not a fixed checklist.

  1. 01

    Consultation

    We talk through what you’re seeing, the building, and the question you need answered. Free, no pressure, no upsell.

  2. 02

    Humidity and dew point

    Temperature, relative humidity and dew point are recorded room by room, with an outdoor reference, because a surface colder than the dew point collects water without any leak.

  3. 03

    Indoor air quality screening

    Real-time particle counts across size channels, with on-site carbon dioxide, VOC and formaldehyde screening, room by room. Screening, not laboratory analysis.

  4. 04

    Comprehensive HVAC evaluation

    Each air handler is opened and checked: blower compartment, coil, drain pan, supply and return plenums, filter, and the attic duct runs it feeds. A frequent hidden source of indoor mold in Florida buildings. Attic-mounted air handlers in Westchase, New Tampa, and the Wesley Chapel master-planned belt are a frequent hidden source here.

  5. 05

    Tracer smoke testing when needed

    Smoke makes local air movement visible at the HVAC system and around penetrations and openings; temperature, humidity and surface-temperature readings help evaluate whether condensation is possible.

  6. 06

    Mold visual inspection

    Daniel personally walks every accessible space in the Hillsborough County property. No subcontractors.

  7. 07

    Thermal imaging

    Infrared imaging surfaces temperature differentials that often correlate with hidden moisture or insulation gaps. Especially valuable for post-Idalia (2023) and post-Milton (2024) concealed cavity moisture in re-finished Tampa Bay assemblies.

  8. 08

    Moisture mapping

    Pin and pinless moisture meters identify elevated wall, floor, and substrate moisture invisible to the eye. Bermuda-fill slab moisture migration in South Tampa, and Gulf-coast salt humidity on Pinellas barrier-island assemblies, both telegraph through baseboard and drywall without visible bulk water.

  9. 09

    Targeted sampling

    Air, surface, swab, ERMI, HERTSMI-2, mycotoxin, Pathways™, VOC, or formaldehyde, only the tests your situation warrants.

  10. 10

    Lab analysis

    Samples sent to AIHA-LAP-accredited third-party laboratories. Results returned within 24 to 72 hours of receipt.

  11. 11

    Written report

    Plain-English report with photos, lab data, moisture readings, observations, and clear next steps. Organized so the client and relevant third parties can follow the observations, data, methods and basis for the assessment conclusions.

  12. 12

    Remediation protocol when warranted

    If assessment findings support professional remediation, Daniel can write, as an optional add-on quoted separately, the IICRC S520-aligned remediation protocol, scope, containment, methods, and clearance criteria, that the remediation contractor works to. PureSpec does not remediate, so the protocol stays independent of the work crew.

Coverage

Every Hillsborough County neighborhood, by appointment from Orlando.

Tampa, Brandon, Riverview, Plant City, Valrico, and the rest of Hillsborough County. Hillsborough County inspections are scheduled by appointment.

Don’t see your neighborhood? Call (321) 324-7756, Daniel travels to every part of the area by appointment.

FAQ

Hillsborough County questions, answered.

Do you still inspect Hurricane Idalia and Milton damage in Hillsborough?

Yes. Idalia (August 2023) pushed catastrophic storm surge into Apollo Beach, Ruskin, and the southern Hillsborough coast. Milton (October 2024) tracked across the entire county at hurricane force and layered additional surge into the same corridor. PureSpec still documents 2023 and 2024 cavity moisture in 2026 inspections, particularly in the Apollo Beach / MiraBay belt where partial remediation prioritized restoration of occupancy.

Do you cover South Tampa's pre-war historic inventory?

Yes. Hyde Park, Palma Ceia, Davis Islands, Bayshore, Seminole Heights, and Ybor all carry pre-war wood-frame on pier foundations with crawl spaces. Inspection scope is calibrated for original-casement leaks, crawl-space moisture, and stack-effect humidity in unconditioned attics.

Do you serve coastal Apollo Beach and MiraBay?

Yes. The Apollo Beach and MiraBay canal-front single-family inventory shows accelerated salt-air HVAC corrosion in addition to the Idalia/Milton surge-and-rain backlog. PureSpec performs full inspections, PRV, and HVAC Mold Inspection work across the coastal strip.

How quickly can you schedule a Hillsborough inspection?

Hillsborough County inspections are scheduled by appointment based on route availability and project scope. PureSpec serves Tampa, Brandon, Riverview, Valrico, Plant City and surrounding Hillsborough County communities. Time-sensitive moisture and active water-loss cases are prioritized when scheduling allows.

Call Now Request a quote